Neelkamal Stainless

Stainless steel CR (cold-rolled) sheet of grade 304L is a popular type of stainless steel sheet known for its corrosion resistance, good formability, and high strength. Here's some information about it:

1. Composition:

   • Grade: 304L is a low-carbon variant of 304 stainless steel, which means it contains less carbon (typically around 0.03% or less). This helps to minimize carbide precipitation during welding and lowers the risk of corrosion in the heat-affected zones of welded joints.

2. Properties:

   • Corrosion Resistance: Excellent corrosion resistance in various environments, especially against acids, alkalis, and chloride solutions.
   • Formability: Good formability and can be easily fabricated, making it suitable for a wide range of applications.
   • Strength: Decent tensile and yield strength, making it suitable for structural applications.
   • Heat Resistance: Resistant to sensitization during continuous or intermittent exposure to high temperatures in the carbide precipitation range (450-850°C or 842-1562°F).

3. Applications:

   • Architectural Applications: Decorative trims, structural elements, and cladding for buildings.
   • Kitchen Equipment: Sinks, appliances, utensils, and food processing equipment.
   • Chemical and Petrochemical Industry: Storage tanks, piping, and equipment for handling corrosive substances.
   • Medical Equipment: Surgical instruments, medical implants, and equipment.
   • Automotive Industry: Exhaust systems, car trim, and grills.
   • Pharmaceutical Industry: Processing equipment and storage vessels.

4. Finishes:

   • Stainless steel CR sheets of 304L can be obtained in various finishes such as 2B (smooth, reflective

Stainless steel plate grade 409 is a ferritic stainless steel commonly used in applications where high-temperature corrosion resistance and good weldability are essential. Here's a detailed description of stainless steel plate grade 409:

1. Chemical Composition:

   • Carbon (C): 0.03% maximum
   • Chromium (Cr): 10.5-11.75%
   • Manganese (Mn): 1.0% maximum
   • Silicon (Si): 1.0% maximum
   • Phosphorus (P): 0.045% maximum
   • Sulfur (S): 0.03% maximum

2. Properties:

   • Corrosion Resistance: Grade 409 provides good resistance to a wide range of corrosive environments, including moderate corrosive conditions such as atmospheric and lightly corrosive industrial environments.
   • Heat Resistance: Grade 409 offers excellent resistance to high-temperature applications and is well-suited for exhaust systems in automobiles and industrial equipment.
   • Weldability: It has good weldability, making it suitable for fabrication and welding processes.
   • Formability: Grade 409 has adequate formability for various applications, but it is not as ductile as some other stainless steel grades.

Stainless steel CR (cold-rolled) sheet of grade 304 is a widely used and versatile austenitic stainless steel known for its excellent corrosion resistance, durability, and ease of fabrication. Here's a detailed description of stainless steel CR sheet grade 304:

1. Chemical Composition:

   • Carbon (C): 0.08% maximum
   • Chromium (Cr): 18-20%
   • Nickel (Ni): 8-10.5%
   • Manganese (Mn): 2% maximum
   • Silicon (Si): 0.75% maximum
   • Phosphorus (P): 0.045% maximum
   • Sulfur (S): 0.03% maximum

2. Properties:

   • Corrosion Resistance: Grade 304 provides excellent corrosion resistance in various environments, including exposure to acids, alkalis, and chloride solutions. It is well-suited for both indoor and outdoor applications.
   • Formability: Good formability and can be easily fabricated, making it suitable for a wide range of applications and manufacturing processes.
   • Strength: It has good tensile and yield strength, making it suitable for structural components and a wide range of applications.
   • Heat Resistance: Resistant to sensitization during continuous or intermittent exposure to high temperatures within the carbide precipitation range (450-850°C or 842-1562°F).

Stainless steel HR (hot-rolled) sheet of grade 304 is a commonly used austenitic stainless steel known for its excellent corrosion resistance, high-temperature strength, and versatility. Here's a detailed description of stainless steel HR sheet grade 304:

1. Chemical Composition:

   • Carbon (C): 0.08% maximum
   • Chromium (Cr): 18-20%
   • Nickel (Ni): 8-10.5%
   • Manganese (Mn): 2% maximum
   • Silicon (Si): 0.75% maximum
   • Phosphorus (P): 0.045% maximum
   • Sulfur (S): 0.03% maximum

2. Properties:

   • Corrosion Resistance: Grade 304 offers outstanding corrosion resistance in a variety of corrosive environments, including exposure to acids, alkalis, and chloride solutions. This makes it suitable for numerous applications across various industries.
   • Formability: While slightly less formable than CR steel, HR grade 304 still has good formability, allowing for a range of fabrication processes.
   • Strength: Hot-rolled 304 stainless steel exhibits higher tensile and yield strength compared to its cold-rolled counterpart, making it suitable for applications that require increased strength.
   • Heat Resistance: Grade 304 is resistant to sensitization during exposure to high temperatures within the carbide precipitation range (450-850°C or 842-1562°F).

Stainless steel HR (hot-rolled) sheet of grade 304L is a widely used austenitic stainless steel known for its excellent corrosion resistance, high-temperature strength, and versatility. Grade 304L is a low-carbon variant of 304 stainless steel, making it suitable for welding applications and minimizing the risk of sensitization. Here's a detailed description of stainless steel HR sheet grade 304L:

1. Chemical Composition:

   • Carbon (C): 0.03% maximum
   • Chromium (Cr): 18-20%
   • Nickel (Ni): 8-12%
   • Manganese (Mn): 2% maximum
   • Silicon (Si): 0.75% maximum
   • Phosphorus (P): 0.045% maximum
   • Sulfur (S): 0.03% maximum

2. Properties:

   • Corrosion Resistance: Grade 304L offers excellent corrosion resistance in a wide range of corrosive environments, similar to standard 304 stainless steel. It is resistant to various acids, alkalis, and chloride solutions.
   • Formability: 304L has good formability and can be easily fabricated using various processes, including hot rolling, making it suitable for a range of applications.
   • Strength: It has good tensile and yield strength, making it suitable for structural components and applications where strength is required.
   • Heat Resistance: Resistant to sensitization during continuous or intermittent exposure to high temperatures within the carbide precipitation range (450-850°C or 842-1562°F).

Stainless steel CR (cold-rolled) sheet of grade 316L is a widely used austenitic stainless steel known for its exceptional corrosion resistance, especially in corrosive environments. It's a low-carbon variant of grade 316 stainless steel, making it suitable for welding applications and minimizing the risk of sensitization. Here's a detailed description of stainless steel CR sheet grade 316L:

1. Chemical Composition:

   • Carbon (C): 0.03% maximum
   • Chromium (Cr): 16-18%
   • Nickel (Ni): 10-14%
   • Molybdenum (Mo): 2-3%
   • Manganese (Mn): 2% maximum
   • Silicon (Si): 1% maximum
   • Phosphorus (P): 0.045% maximum
   • Sulfur (S): 0.03% maximum

2. Properties:

   • Corrosion Resistance: Grade 316L offers outstanding corrosion resistance, particularly in harsh environments exposed to chlorides, acids, and high salinity. It is a common choice for marine and chemical processing applications.
   • Formability: Good formability, allowing for a variety of fabrication processes, including cold rolling.
   • Strength: It has good tensile and yield strength, making it suitable for structural components and applications that require higher strength.
   • Heat Resistance: Resistant to sensitization during continuous or intermittent exposure to high temperatures within the carbide precipitation range (450-850°C or 842-1562°F).

Stainless steel HR (hot-rolled) sheet of grade 316L is a widely used and highly corrosion-resistant austenitic stainless steel known for its excellent properties in various environments. Grade 316L is a low-carbon variant of grade 316 stainless steel, making it suitable for welding applications and minimizing the risk of sensitization. Here's a detailed description of stainless steel HR sheet grade 316L:

1. Chemical Composition:

   • Carbon (C): 0.03% maximum
   • Chromium (Cr): 16-18%
   • Nickel (Ni): 10-14%
   • Molybdenum (Mo): 2-3%
   • Manganese (Mn): 2% maximum
   • Silicon (Si): 1% maximum
   • Phosphorus (P): 0.045% maximum
   • Sulfur (S): 0.03% maximum

2. Properties:

   • Corrosion Resistance: Grade 316L offers exceptional corrosion resistance, particularly in corrosive environments exposed to chlorides, acids, and high salinity. It is a common choice for marine and chemical processing applications.
   • Formability: While hot-rolled, 316L retains good formability, allowing for a variety of fabrication processes and shaping according to specific requirements.
   • Strength: It has good tensile and yield strength, making it suitable for structural components and applications requiring elevated strength.
   • Heat Resistance: Resistant to sensitization during continuous or intermittent exposure to high temperatures within the carbide precipitation range (450-850°C or 842-1562°F).

Stainless steel HR (hot-rolled) plate of grade 304 is a popular austenitic stainless steel known for its excellent corrosion resistance, versatility, and ease of fabrication. It is widely used in various industrial and domestic applications. Here's a detailed description of stainless steel HR plate grade 304:

1. Chemical Composition:

   • Carbon (C): 0.07% maximum
   • Chromium (Cr): 18-20%
   • Nickel (Ni): 8-10.5%
   • Manganese (Mn): 2% maximum
   • Silicon (Si): 0.75% maximum
   • Phosphorus (P): 0.045% maximum
   • Sulfur (S): 0.03% maximum

2. Properties:

   • Corrosion Resistance: Grade 304 offers excellent corrosion resistance in a wide range of corrosive environments, making it suitable for various applications.
   • Formability: Good formability, allowing for a variety of fabrication processes, including hot rolling, and making it suitable for diverse applications.
   • Strength: It has good tensile and yield strength, making it suitable for structural components and applications that require strength and durability.
   • Heat Resistance: Grade 304 can withstand exposure to moderately high temperatures

Stainless steel HR (hot-rolled) plate of grade 304L is a widely used austenitic stainless steel known for its excellent corrosion resistance, versatility, and ease of fabrication. It is a low-carbon variant of grade 304, which provides improved weldability and reduces the risk of sensitization during welding. Here's a detailed description of stainless steel HR plate grade 304L:

1. Chemical Composition:

   • Carbon (C): 0.03% maximum
   • Chromium (Cr): 18-20%
   • Nickel (Ni): 8-12%
   • Manganese (Mn): 2% maximum
   • Silicon (Si): 0.75% maximum
   • Phosphorus (P): 0.045% maximum
   • Sulfur (S): 0.03% maximum

2. Properties:

   • Corrosion Resistance: Grade 304L offers excellent corrosion resistance in various environments, similar to standard 304 stainless steel. It is resistant to a wide range of acids, alkalis, and chloride solutions.
   • Formability: Good formability, allowing for a variety of fabrication processes, including hot rolling, and making it suitable for diverse applications.
   • Strength: It has good tensile and yield strength, making it suitable for structural components and applications that require strength and durability.
   • Heat Resistance: Resistant to sensitization during continuous or intermittent exposure to high temperatures within the carbide precipitation range (450-850°C or 842-1562°F).

Stainless steel HR (hot-rolled) plate of grade 316 is a widely used austenitic stainless steel known for its exceptional corrosion resistance, high-temperature strength, and versatility. Grade 316 stainless steel contains higher levels of chromium, nickel, and molybdenum compared to 304, enhancing its resistance to corrosive environments. Here's a detailed description of stainless steel HR plate grade 316:

1. Chemical Composition:

   • Carbon (C): 0.08% maximum
   • Chromium (Cr): 16-18%
   • Nickel (Ni): 10-14%
   • Molybdenum (Mo): 2-3%
   • Manganese (Mn): 2% maximum
   • Silicon (Si): 1% maximum
   • Phosphorus (P): 0.045% maximum
   • Sulfur (S): 0.03% maximum

2. Properties:

   • Corrosion Resistance: Grade 316 offers exceptional corrosion resistance, particularly in harsh environments exposed to chlorides, acids, and high salinity. It is widely used in marine, chemical processing, and other corrosive environments.
   • Formability: While hot-rolled, 316 retains good formability, allowing for a variety of fabrication processes and shaping according to specific requirements.
   • Strength: It has good tensile and yield strength, making it suitable for structural components and applications requiring elevated strength.
   • Heat Resistance: Resistant to sensitization during continuous or intermittent exposure to high temperatures within the carbide precipitation range (450-850°C or 842-1562°F).

Stainless steel HR (hot-rolled) plate of grade 316L is a popular austenitic stainless steel known for its exceptional corrosion resistance, high-temperature strength, and versatility. It's a low-carbon variant of grade 316 stainless steel, making it suitable for welding applications and minimizing the risk of sensitization. Here's a detailed description of stainless steel HR plate grade 316L:

1. Chemical Composition:

   • Carbon (C): 0.03% maximum
   • Chromium (Cr): 16-18%
   • Nickel (Ni): 10-14%
   • Molybdenum (Mo): 2-3%
   • Manganese (Mn): 2% maximum
   • Silicon (Si): 1% maximum
   • Phosphorus (P): 0.045% maximum
   • Sulfur (S): 0.03% maximum

2. Properties:

   • Corrosion Resistance: Grade 316L offers outstanding corrosion resistance, particularly in harsh environments exposed to chlorides, acids, and high salinity. It is widely used in marine and chemical processing applications.
   • Formability: Although hot-rolled, 316L retains good formability, allowing for a variety of fabrication processes and shaping according to specific requirements.
   • Strength: It has good tensile and yield strength, making it suitable for structural components and applications requiring elevated strength.
   • Heat Resistance: Resistant to sensitization during continuous or intermittent exposure to high temperatures within the carbide precipitation range (450-850°C or 842-1562°F).

Stainless steel sheet grade 202 is a widely used austenitic stainless steel known for its excellent corrosion resistance, high strength, formability, and cost-effectiveness. It is a low-nickel, high-manganese stainless steel that provides good performance in various applications. Here's a detailed description of stainless steel sheet grade 202:

1. Chemical Composition:

   • Carbon (C): 0.15% maximum
   • Chromium (Cr): 16-18%
   • Nickel (Ni): 4-6%
   • Manganese (Mn): 7.5-10%
   • Silicon (Si): 1% maximum
   • Phosphorus (P): 0.06% maximum
   • Sulfur (S): 0.03% maximum

2. Properties:

   • Corrosion Resistance: Grade 202 offers good corrosion resistance in many environments, though not as high as grades like 304 or 316. It is suitable for applications where moderate corrosion resistance is required.
   • Formability: Good formability, making it suitable for various fabrication processes such as bending, stamping, and welding.
   • Strength: It has good tensile and yield strength, providing structural integrity in various applications.
   • Heat Resistance: Resistant to sensitization during moderate heat exposure and intermittent high-temperature conditions.

Stainless steel sheet grade 321 is a stabilized austenitic stainless steel known for its excellent corrosion resistance, high-temperature strength, and resistance to intergranular corrosion. The stabilization is achieved through the addition of titanium. Here's a detailed description of stainless steel sheet grade 321:

1. Chemical Composition:

   • Carbon (C): 0.08% maximum
   • Chromium (Cr): 17-19%
   • Nickel (Ni): 9-12%
   • Manganese (Mn): 2% maximum
   • Silicon (Si): 0.75% maximum
   • Phosphorus (P): 0.045% maximum
   • Sulfur (S): 0.03% maximum
   • Titanium (Ti): 5 times the carbon content (min. 0.70%)

2. Properties:

   • Corrosion Resistance: Grade 321 offers excellent corrosion resistance, especially against intergranular corrosion in high-temperature environments. It is resistant to various acids, alkalis, and saltwater.
   • Heat Resistance: Exceptional high-temperature strength and resistance to oxidation at temperatures up to approximately 900-1000°C (1652-1832°F).
   • Formability: Good formability and weldability, allowing for various fabrication processes, including bending and welding.
   • Stability: Stabilized against chromium carbide precipitation due to the addition of titanium, reducing the risk of intergranular corrosion.

Stainless steel sheet grade 409 is a ferritic stainless steel that offers good mechanical properties, high-temperature resistance, and excellent corrosion resistance. It's primarily used in automotive exhaust systems and applications where corrosion resistance and heat resistance are important. Here's a detailed description of stainless steel sheet grade 409:

1. Chemical Composition:

   • Carbon (C): 0.08% maximum
   • Chromium (Cr): 10.5-11.75%
   • Nickel (Ni): 0.5% maximum
   • Manganese (Mn): 1% maximum
   • Silicon (Si): 1% maximum
   • Phosphorus (P): 0.045% maximum
   • Sulfur (S): 0.03% maximum

2. Properties:

   • Corrosion Resistance: Grade 409 offers good resistance to various corrosive environments, including mild atmospheres and many organic and inorganic chemicals. However, it is not as corrosion-resistant as austenitic grades like 304 and 316.
   • Heat Resistance: Provides good resistance to high-temperature oxidation, making it suitable for applications involving elevated temperatures such as automotive exhaust systems.
   • Formability: Grade 409 has good formability and weldability, making it suitable for a variety of fabrication processes.
   • Strength: Possesses good mechanical properties and moderate tensile strength.

3. Applications:

   • Automotive Exhaust Systems: Primary application is in automotive exhaust systems, catalytic converters, and mufflers due to its high-temperature resistance and corrosion resistance in this specific environment.
   • Heat Exchangers: Used in heat exchangers and heating elements where high-temperature resistance is required.
   • Architectural Applications: Occasionally used in architectural applications where corrosion resistance and aesthetics are important.
   • Fuel Filters and Oil Filtration Systems: Used for its resistance to corrosion from automotive fluids and chemicals.
   • Industrial Equipment: Various industrial equipment where corrosion resistance and heat resistance are needed.

Stainless steel sheet grade 410 is a martensitic stainless steel known for its high strength, hardness, and wear resistance. It's commonly used in applications where these properties are crucial. Here's a detailed description of stainless steel sheet grade 410:

1. Chemical Composition:

   • Carbon (C): 0.08-0.15%
   • Chromium (Cr): 11.5-13.5%
   • Manganese (Mn): 1% maximum
   • Silicon (Si): 1% maximum
   • Phosphorus (P): 0.04% maximum
   • Sulfur (S): 0.03% maximum

2. Properties:

   • Corrosion Resistance: Grade 410 provides good corrosion resistance, especially in mildly corrosive environments. It is less corrosion-resistant than austenitic stainless steels but offers good resistance to corrosion in the hardened and tempered condition.
   • Hardness: Grade 410 has high hardness levels due to its martensitic structure, making it suitable for applications requiring wear resistance and high strength.
   • Strength: Excellent strength and toughness are characteristic of grade 410, especially after heat treatment.
   • Heat Resistance: Good heat resistance, making it suitable for various high-temperature applications.

Stainless steel plate grade 410 is a martensitic stainless steel known for its high strength, hardness, and wear resistance. It also offers good corrosion resistance, although not as high as austenitic stainless steels. Grade 410 is often used in applications where strength, hardness, and corrosion resistance are crucial. Here's a detailed description of stainless steel plate grade 410:

1. Chemical Composition:

   • Carbon (C): 0.08-0.15%
   • Chromium (Cr): 11.5-13.5%
   • Manganese (Mn): 1% maximum
   • Silicon (Si): 1% maximum
   • Phosphorus (P): 0.04% maximum
   • Sulfur (S): 0.03% maximum

2. Properties:

   • Corrosion Resistance: Grade 410 provides good corrosion resistance, especially in mildly corrosive environments. It is less corrosion-resistant than austenitic stainless steels but offers good resistance to corrosion in the hardened and tempered condition.
   • Hardness: Grade 410 has high hardness levels due to its martensitic structure, making it suitable for applications requiring wear resistance and high strength.
   • Strength: Excellent strength and toughness are characteristic of grade 410, especially after heat treatment.
   • Heat Resistance: Good heat resistance, making it suitable for various high-temperature applications.

Stainless steel CR (cold-rolled) sheet of grade 316 is a highly corrosion-resistant austenitic stainless steel known for its excellent properties in various environments. Here's a detailed description of stainless steel CR sheet grade 316:

1. Chemical Composition:

   • Carbon (C): 0.08% maximum
   • Chromium (Cr): 16-18%
   • Nickel (Ni): 10-14%
   • Molybdenum (Mo): 2-3%
   • Manganese (Mn): 2% maximum
   • Silicon (Si): 1% maximum
   • Phosphorus (P): 0.045% maximum
   • Sulfur (S): 0.03% maximum

2. Properties:

   • Corrosion Resistance: Grade 316 offers exceptional corrosion resistance, especially in corrosive environments exposed to chlorides, acids, and high salinity. It is often used in marine and chemical processing applications.
   • Formability: Good formability, making it suitable for various fabrication processes, including cold rolling.
   • Strength: It has good tensile and yield strength, making it suitable for structural applications and components subjected to high stress.
   • Heat Resistance: Resistant to sensitization during continuous or intermittent exposure to high temperatures within the carbide precipitation range (450-850°C or 842-1562°F).

Stainless steel sheet grade 347 is an austenitic stainless steel known for its excellent high-temperature and corrosion resistance properties. It contains niobium, which enhances its resistance to intergranular corrosion and provides stability during welding. Here's a detailed description of stainless steel sheet grade 347:

1. Chemical Composition:

   • Carbon (C): 0.08% maximum
   • Chromium (Cr): 17-20%
   • Nickel (Ni): 9-13%
   • Manganese (Mn): 2% maximum
   • Silicon (Si): 0.75% maximum
   • Phosphorus (P): 0.045% maximum
   • Sulfur (S): 0.03% maximum
   • Niobium (Nb) + Tantalum (Ta): 10 times the carbon content (min. 0.4%)

2. Properties:

   • Heat Resistance: Excellent high-temperature strength and resistance to oxidation up to approximately 800-900°C (1472-1652°F).
   • Corrosion Resistance: Resistant to intergranular corrosion, pitting, and crevice corrosion in various corrosive environments, including those with chloride and acidic solutions.
   • Weldability: Good weldability and fabrication characteristics, making it suitable for various applications requiring welding.
   • Stability: Stabilized against chromium carbide precipitation due to the addition of niobium, reducing the risk of intergranular corrosion after exposure to elevated temperatures.

Stainless steel sheet grade 430 is a widely used ferritic stainless steel known for its good corrosion resistance, formability, and cost-effectiveness. Here's a detailed description of stainless steel sheet grade 430:

1. Chemical Composition:

   • Carbon (C): 0.12% maximum
   • Chromium (Cr): 16-18%
   • Manganese (Mn): 1.0% maximum
   • Silicon (Si): 1.0% maximum
   • Phosphorus (P): 0.04% maximum
   • Sulfur (S): 0.03% maximum

2. Properties:

   • Corrosion Resistance: Grade 430 offers good corrosion resistance in mild environments. It is resistant to atmospheric corrosion and mildly corrosive chemicals and moisture.
   • Heat Resistance: While it is not as heat-resistant as austenitic stainless steels, grade 430 can withstand moderate heat levels and is suitable for applications where heat resistance is needed to a certain extent.
   • Formability: It has good formability, making it suitable for a variety of applications that require shaping, bending, and drawing.
   • Magnetic Properties: Grade 430 is a ferritic stainless steel, and as such, it exhibits magnetic properties.

Stainless steel sheet grade 904L is a high-alloy austenitic stainless steel primarily known for its exceptional corrosion resistance, especially in aggressive environments. Here's a detailed description of stainless steel sheet grade 904L:

1. Chemical Composition:

   • Carbon (C): 0.020% maximum
   • Chromium (Cr): 19-23%
   • Nickel (Ni): 23-28%
   • Molybdenum (Mo): 4-5%
   • Copper (Cu): 1-2%
   • Manganese (Mn): 2.0% maximum
   • Silicon (Si): 1.0% maximum
   • Phosphorus (P): 0.045% maximum
   • Sulfur (S): 0.035% maximum

2. Properties:

   • Corrosion Resistance: Grade 904L offers exceptional corrosion resistance, particularly in harsh environments such as sulfuric acid, acetic acid, and phosphoric acid. It is resistant to both crevice and stress corrosion cracking.
   • Heat Resistance: Excellent resistance to high-temperature oxidation and scaling, making it suitable for applications in elevated temperature environments.
   • Formability: It has good formability and weldability, allowing for a wide range of fabrication options.
   • High Strength: 904L has high tensile and yield strength compared to many other stainless steel grades.

Stainless steel HR (hot-rolled) sheet of grade 316L is a widely used and highly corrosion-resistant austenitic stainless steel known for its excellent properties in various environments. Grade 316L is a low-carbon variant of grade 316 stainless steel, making it suitable for welding applications and minimizing the risk of sensitization. Here's a detailed description of stainless steel HR sheet grade 316L:

1. Chemical Composition:

   • Carbon (C): 0.03% maximum
   • Chromium (Cr): 16-18%
   • Nickel (Ni): 10-14%
   • Molybdenum (Mo): 2-3%
   • Manganese (Mn): 2% maximum
   • Silicon (Si): 1% maximum
   • Phosphorus (P): 0.045% maximum
   • Sulfur (S): 0.03% maximum

2. Properties:

   • Corrosion Resistance: Grade 316L offers exceptional corrosion resistance, particularly in corrosive environments exposed to chlorides, acids, and high salinity. It is a common choice for marine and chemical processing applications.
   • Formability: While hot-rolled, 316L retains good formability, allowing for a variety of fabrication processes and shaping according to specific requirements.
   • Strength: It has good tensile and yield strength, making it suitable for structural components and applications requiring elevated strength.
   • Heat Resistance: Resistant to sensitization during continuous or intermittent exposure to high temperatures within the carbide precipitation range (450-850°C or 842-1562°F).

Stainless steel sheet grade 310 is a high-temperature austenitic stainless steel known for its excellent resistance to high-temperature oxidation and sulfidation. It offers exceptional high-temperature strength and corrosion resistance. Here's a detailed description of stainless steel sheet grade 310:

1. Chemical Composition:

   • Carbon (C): 0.25% maximum
   • Chromium (Cr): 24-26%
   • Nickel (Ni): 19-22%
   • Manganese (Mn): 2% maximum
   • Silicon (Si): 1.5% maximum
   • Phosphorus (P): 0.045% maximum
   • Sulfur (S): 0.03% maximum

2. Properties:

   • Heat Resistance: Grade 310 offers excellent high-temperature resistance and thermal cycling properties, making it suitable for applications in furnaces, heat treatment equipment, and other high-temperature environments.
   • Corrosion Resistance: Resistant to corrosion in many harsh environments, including oxidizing and reducing atmospheres, sulfidation, and carburization at high temperatures.
   • Formability: Offers good formability and weldability despite its high-temperature properties.
   • Strength: Possesses good strength and toughness, providing structural integrity in various applications.

Stainless steel plate grade 310 is a high-temperature austenitic stainless steel known for its excellent resistance to high-temperature oxidation and sulfidation. It belongs to the 300 series of stainless steels and offers exceptional strength and corrosion resistance at elevated temperatures. Here's a detailed description of stainless steel plate grade 310:

1. Chemical Composition:

   • Carbon (C): 0.25% maximum
   • Chromium (Cr): 24-26%
   • Nickel (Ni): 19-22%
   • Manganese (Mn): 2% maximum
   • Silicon (Si): 1.5% maximum
   • Phosphorus (P): 0.045% maximum
   • Sulfur (S): 0.03% maximum

2. Properties:

   • Heat Resistance: Grade 310 offers excellent high-temperature resistance and thermal cycling properties, making it suitable for applications in furnaces, heat treatment equipment, and other high-temperature environments.
   • Corrosion Resistance: Resistant to corrosion in many harsh environments, including oxidizing and reducing atmospheres, sulfidation, and carburization at high temperatures.
   • Formability: Offers good formability and weldability despite its high-temperature properties.
   • Strength: Possesses good strength and toughness, providing structural integrity in various applications.